4.0-5.0T Electric Forklift
ergonomics concepts in designing and manufacturing. The forklift with low cost of ownership, superior visibility, unmatched productivity, safety and ergonomics designing for operator. It can be widely used in factory, warehouse, logistic center and especially in cold storage and food industry.
-
Introduction
The EQUIPMAX 4.0-5.0T four wheel electric forklift adopts the latest technologies and ergonomics concepts in designing and manufacturing. The forklift with low cost of ownership, superior visibility, unmatched productivity, safety and ergonomics designing for operator. It can be widely used in factory, warehouse, logistic center and especially in cold storage and food industry.Electrical system
The imported Italian ZAPI, USA Curtis, Italy SME AC controller with microprocessor control system of the motor speed and temperature feedback signal ,regenerative braking and CANBAUA universal interface to ensure the accurate control of driving and lifting system. The regenerative braking can capture and reserve energy while braking.
The subsidiary pump motor controller will put into operation by the system automatically while lifting in need of the high flow oil pressure, this will avoid the extra energy consumption and extend battery life.
The emergency power disconnect switch is within easy reach while emergency events
Multifunctional display provides extensive information on truck operation and maintenance state, it with waterproof and shock proof protection. The advanced wiring harness, waterproof connectors and multiunit fuse module ensure the security and reliability of the circuit.
Driving and transmission system
Full suspension type of semi-axis for the driving axle, and it only bear the torque and other load is born by the outside case.
TCM technology transmission with floating system highly reduces the forklift vibration and noise.
Hydraulic system
Japanese Shimadzu multi valves and gear pump, and the Japanese NOK sealing elements. The high quality hydraulic components and rational distribution of the pipes helps to control the oil pressure and highly improved the forklift performance.
Steering and brake system
Adopt latest manufactured low- input torque redirector. The steering pull in place is only 6-8N, which is less than former one by 50%.
Steering axle adopts up and down type steering rod, with simple structure and better intensity and its both ends adopt joint bearing, enhancing the installation hole of joint bearing. The performance of steering axle is more reliable.
TCM technology brake system which is sensitive and light full hydraulic with a better performance braking.Technical Specification
Main Specification 1.1 Brand EQUIPMAX EQUIPMAX 1.2 Model FB45 FB50 1.3 Power Type Battery Battery 1.4 Driving Style Seated Seated 1.5 Rated Capacity Q(kg) 4500 4999 1.6 Load Center C(mm) 500 500 1.8 Front Overhand x(mm) 530 530 1.9 Wheelbase y(mm) 2000 2000 Weight 2.1 Service Weight(incl.battery) kg 6800 7100 Wheel 3.1 Wheel Types Solid rubber tyre Solid rubber tyre 3.2 Load Wheel mm 540×205-230 540×205-230 3.3 Drive wheel mm 250-381 250-381 3.5 Number of wheels,,front/rear(x=drive wheel) 2x/2 2x/2 3.6 Wheel tread,drive side b10(mm) 1225 1225 3.7 Wheel tread,load side b11(mm) 1025 1025 Size 4.1 Mast tilting α/β(°) 6/11 6/11 4.2 Mast closed height h1(mm) 2180 2180 4.3 Free lift height h2(mm) 150 150 4.4 Lift height h3(mm) 3000 3000 4.5 Mast extended height with load-backrest h4(mm) 4040 4040 4.7 Overhead guard height h6(mm) 2250 2250 4.8 Seat height h7(mm) 1230 1230 4.19 Overall length L1(mm) 4060 4060 4.20 Length to fork face L2(mm) 2990 2990 4.21 Overall width b1/b2(mm) 1470/1350 1470/1350 4.22 Fork size l/e/s(mm) 1070/150/50 1070/150/50 4.23 Installation level 3A 3A 4.24 Fork carriage width b3(mm) 1380 1380 4.25 Fork outside width b5(mm) 320~1320 320~1320 4.31 Mast ground clearance m1(mm) 120 120 4.32 Body ground clearance m2(mm) 120 120 4.34 Aisle width for pallet 1000*1200 Ast(mm) 4490 4490 Aisle width for pallet 800*1200 Ast(mm) 4690 4690 4.35 Turning radius Wa(mm) 2690 2690 Function 5.1 Driving speed(load/unload) km/h 12/13 12/13 5.2 Lifting speed(load/unload) mm/s 200/220 200/220 5.3 Lowering speed(load/unload) mm/s 270/290 270/290 5.5 Traction capacity(load/unload)(S2-5min) N 15400 15680 5.8 Max.Gradeability(load/unload)(S2-5min) %(tanθ ) 15/15 15/15 5.10 Brake type Mechanical hydraulic Mechanical hydraulic Drive 6.1 Driving motor(S2-60min) kw AC16.6 AC16.6 6.2 Lifting motor(S3-15%) kw AC15 AC15 6.4 Battery voltage/capacity V/Ah 80/560 80/630 6.5 Battery weight kg 1390 1690 6.6 Steering system Hydraulic type Hydraulic type * EQUIPMAX retains the right to adjust the specification and configurations to improve the performance without notice, please contact us at info@equipmax-industries.com to get the newest information.