• Top
  • +86 151-58072124
  • WhatsApp

info@equipmax-industries.com

HOME    Forklift Truck    Diesel Forklift    4.0T Diesel Forklift (Mini)

4.0T Diesel Forklift (Mini)

EQUIPMAX compacted size 4.0T diesel forklift adopts the newest technologies and ergonomic 
concepts in designing and manufacturing. The forklift with low cost of ownership, superior 
visibility, unmatched technique, safety and ergonomics designing for operator. It can be widely 
used in warehouse, factory, port and construction plant, etc.
Send Email
MOQ:
  • Introduction
    EQUIPMAX compacted size 4.0T diesel forklift adopts the newest technologies and ergonomic concepts in designing and manufacturing. The forklift with low cost of ownership, superior visibility, unmatched technique, safety and ergonomics designing for operator. It can be widely used in warehouse, factory, port and construction plant, etc.

     

    Engine and transmission system
    High performance engine like Isuzu, Mitsubishi, Yanmar, Xinchai for diesel forklift with EUIIIB/EUIV/EPA standards, which is high work efficiency, lower fuel consumption and low emission levels.
    The forklift with Japanese level TCM technology transmission which ensure the high efficiency power transfer and performance.

     

    Electrical system
    Light indication / LCD display provides extensive information on truck operation and maintenance, it is with waterproof and shock proof protection. The advanced wiring harness, waterproof connectors and multiunit fuse module ensure the security and reliability of the circuit.
    Optional LED lights can provide a better lighting environment and reduces the power consumption.

     

    Hydraulic system
    EQUIPMAX forklift equipped with Japanese Shimadzu multi valves and gear pump and Japanese NOK sealing elements. The high quality hydraulic components and rational distribution of the pipes helps to control the oil pressure and highly improved the forklift performance.

     

    Exhaust and cooling system
    EQUIPMAX adopts the large capacity radiator and optimized heat dissipation channel. The combination of engine coolant and transmission fluid radiator is designed for maximum air flow passing through the counterweight.
    The exhaust comes from the end face of muffler, using external type sparkle arrester, the exhaust resistance is greatly reduced, the function of smoke and fire extinguisher is more reliable. Particle soot filter and catalytic converter devices is optional device to improve the exhausting performance.

     

    Steering and brake system
    Steering axle adopts shock-mitigating device, it is install a up and down type steering rod with simple structure and better intensity and its both ends adopt joint bearing which enhanced the installation hole .
    Japanese TCM technology type of brake system which is sensitive and light full hydraulic with a better performance braking.

     

    Technical Specification

    1 Brand   EQUIPMAX
    2 Model   FD40T
    3 Power Type   Diesel
    4 Rated Load Capacity Q(kg) 4000
    5 Load Centre C(mm) 500
    6 Rated Lift Height H3(mm) 3000
    7 Free Lift Height H2(mm) 100
    8 Fork Size (L×W×T) mm 1070×150×50
    9 Mast Tilt Angle (F/R, α°/β°) deg 6/12
    10 Fork Overhang (Wheel Center to Fork Face) X1(mm) 495
    11 Rear Overhang X2(mm) 565
    12 Ground Clearance (Bottom of Mast) H7(mm) 130
    13 Length to Face of Fork (Without Fork) L1(mm) 2960
    14 Overall Width B1(mm) 1410
    15 Mast Lowered Height H1(mm) 2070
    16 Mast Extended Height (With Backrest) H4(mm) 4250
    17 Overhead Guard Height H5(mm) 2250
    18 Turning Radius (Outside) Wa(mm) 2688
    19 Min.Aisle width for pallets  Ast(mm) 2692
    20 Travel Speed (No Load) km/h 20
    21 Lifting Speed (Full Load) mm/sec 360
    22 Lowering Speed  (Full Load) mm/sec 425
    23 Max.Drawbar Pull (Full Load) KN 17
    24 Max.Gradeability (Full Load) % 20
    25 Tyre (Front x 2) mm 250-15-16PR 
    26 Tyre (Rear x 2) mm 7.00-12
    27 Front Tread B2(mm) 1160
    28 Rear Tread B3(mm) 1150
    29 Wheelbase Y(mm) 1900
    30 Total Weight kg 5450
    31 Front Axle Weight Distribution (Full Load) kg 8500
    32 Rear Axle Weight Distribution (Full Load) kg 950
    33 Front Axle Weight Distribution (No Load) kg 2200
    34 Rear Axle Weight Distribution (No Load) kg 3250
    35 Battery V/Ah 12/90
    36 Engine Model    4JG2
    37 Engine Manufacturer   ISUZU
    38 Rated Output / r.p.m. kw 44.9KW/2450
    39 Rated Torque / r.p.m. N·m 184.7Nm/1700
    40 No.of Cylinder   4
    41 Bore x Stroke mm 95.4×107
    42 Displacement L 3.059
    43 Fuel Tank Capacity L 80
    44 Transmission Type   YQXD30
    45 Transmission Stage (FWD/RVS)   1/1
    46 Operating Pressure (For Attachments)  Mpa 14.5


    * EQUIPMAX retains the right to adjust the specification and configurations to improve the performance without notice, please contact us at info@equipmax-industries.com to get the newest information. 

控件[tem_25_34]渲染出错,Source:未将对象引用设置到对象的实例。
Inquiry Online
控件[tem_25_34]渲染出错,Source:未将对象引用设置到对象的实例。