1.0-1.5T 3-Wheel Electric Forklift
concepts in designing and manufacturing. The forklift with low cost of ownership, superior visibility, unmatched productivity, safety and ergonomics designing for operator. It can be widely used in factory, warehouse, logistic center and especially in cold storage and food industry.
-
Introduction
Equipmax 1.0-1.5T three wheel electric forklift adopts the latest technologies and ergonomics concepts in designing and manufacturing. The forklift with low cost of ownership, superior visibility, unmatched productivity, safety and ergonomics designing for operator. It can be widely used in factory, warehouse, logistic center and especially in cold storage and food industry.Electrical system
The DALA, ZAPI, CURTIS and SME AC controller with microprocessor control system of the motor speed and temperature feedback signal ,regenerative braking and CANBAUA universal interface to ensure the accurate control of driving and lifting system. The regenerative braking can capture and reserve energy while braking.
The subsidiary pump motor controller will put into operation by the system automatically while lifting in need of the high flow oil pressure, this will avoid the extra energy consumption and extend battery life.
The emergency power disconnect switch is within easy reach while emergency events
Multifunctional display provides extensive information on truck operation and maintenance state, it with waterproof and shock proof protection. The advanced wiring harness, waterproof connectors and multiunit fuse module ensure the security and reliability of the circuit.
Driving and transmission system
Full suspension type of semi-axis for the driving axle, and it only bear the torque and other load is born by the outside case.
TCM technology transmission with floating system highly reduces the forklift vibration and noise.
Hydraulic system
Japanese Shimadzu multi valves and gear pump, and the Japanese NOK sealing elements. The high quality hydraulic components and rational distribution of the pipes helps to control the oil pressure and highly improved the forklift performance.
Steering and brake system
Adopt latest manufactured low- input torque redirector. The steering pull in place is only 6-8N, which is less than former one by 50%.
Steering axle adopts up and down type steering rod, with simple structure and better intensity and its both ends adopt joint bearing, enhancing the installation hole of joint bearing. The performance of steering axle is more reliable.
TCM technology brake system which is sensitive and light full hydraulic with a better performance braking.Technical Specification
1 Brand EQUIPMAX EQUIPMAX 2 Model FB10S FB15S 3 Power Type Electric Electric 4 Operation Type Seated Type Seated Type 5 Load Capacity Q(Kg) 1000 1500 6 Load Center C(mm) 500 500 7 Front Overhang X(mm) 196 196 8 Wheelbase Y(mm) 1130 1130 9 Service Weight (With Battery） kg 2120 2150 10 Wheel Type F Rubber/R Polyurethane F Rubber/R Polyurethane 11 Driving Wheel ∅×w(mm) ∅230×110 ∅230×110 12 Front Wheel ∅×w(mm) ∅305×127 ∅305×127 13 Front Wheelbase mm 752 752 14 Mast Tilting Angle (F/R) α/β(°) 2/4 2/4 15 Mast Lowered Height h1(mm) 2035 2035 16 Free Lift h2(mm) 0 0 17 Lifting Height h3(mm) 3000 3000 18 Mast Extended Height h4(mm) 3918 3918 19 Height of Overhead Guard h13(mm) 1930 1930 20 Fork Clearance Mast Lowered h(mm) 35 35 21 Overall Length (With Fork) L1(mm) 2680 2680 22 Overall Length to Fork Face L2(mm) 1610 1610 23 Overall Width b1(mm) 880 880 24 Fork Size s/e/l(mm) 35/100/1070 35/100/1070 25 Fork Spread b5(mm) 210-580 210-580 26 Min. Ground Clearance m2(mm) 60 60 27 Aisle Width for Pallet 1000*1200 Ast(mm) 2931 2931 28 Min. Turning Radius Wa(mm) 1425 1425 29 Max. Travel Speed (Unladen/Laden) km/h 5.2/5 5.2/5 30 Lifting Speed (Unladen/Laden) m/s 0.135/0.095 0.135/0.090 31 Lowering Speed (Unladen/Laden) m/s 0.085/0.120 0.085/0.120 32 Max. Gradeability (Unladen/Laden) ％ 6/4 6/4 33 Service Brake Hydraulic+Electromagnetic Hydraulic+Electromagnetic 34 Drive Motor kw 1.5 AC 2.5 AC 35 Lift Motor kw 3.0 DC 3.0 DC 36 Battery V/Ah 24V/270Ah 24V/300Ah 37 Charger V/A 24V/40A 24V/40A 38 Type of Drive Control AC AC 39 Noise Level dB(A) 75 75 * EQUIPMAX retains the right to adjust the specification and configurations to improve the performance without notice, please contact us at info@equipmax-industries.com to get the newest information.
